輔導案例-COMP3301/COMP7308課程中，將向?qū)W生介紹組織面臨的現實世界的網絡安全挑戰，并學習應用通過其他計算機科學課程獲得的知識和技能來應對這些挑戰。挑戰將從攻擊者的角度(如何利用系統)和防御者的角度(如何保護系統或應對威脅)的角度進行審查。將探討針對軟件，Web應用程序，網絡，操作系統，密碼系統和人員的常見攻擊和防御策略。該課程還將介紹網絡安全管理概念，包括安全運營，風險管理，安全工程和安全體系結構，并針對專門從事網絡安全的不同職業道路提供指導。

　　COMP3301/COMP7308 2019 Assignment 2 (DRAFT)

　　? DRAFT

　　? Revision : 232

　　1 Process Accounting Pseudo Device Driver

　　This assignment asks you to write a device driver for the OpenBSD kernel that implements a replacement

　　for the current process accounting facility.

　　Process accounting is a facility that allows administrators to audit the system resource utilisation of

　　commands run by users.

　　Process accounting in OpenBSD is currently implemented via the acct(2) system call that enables or

　　disables of logging of commands to a file, the accton(8) utility for calling the syscall, and the sa(8) and

　　lastcom(8) utilities for processing said file. The format of the file is described in the acct(5) manual

　　page.

　　A pseudo device driver is an actual driver, but not one that implements support for physical hardware. It

　　provides a virtual, software only, service for user programs to use.

　　Device special file are entries in a filesystem that refer to a set of functions in the kernel that implement

　　file behaviour such as open, read, write, and close.

　　Examples of pseudo device drivers that provide device special files are zero(4), null(4), tun(4), and

　　tap(4).

　　This is an individual assignment. You should feel free to discuss aspects of C programming and the

　　assignment specification with fellow students. You should not actively help (or seek help from) other

　　students with the actual coding of your assignment solution. It is cheating to look at another student’s

　　code and it is cheating to allow your code to be seen or shared in printed or electronic form. You should

　　note that all submitted code may be subject to automated checks for plagiarism and collusion. If we detect

　　plagiarism or collusion, formal misconduct proceedings will be initiated against you. If you're having

　　trouble, seek help from a member of the teaching staff. Don't be tempted to copy another student's code.

　　You should read and understand the statements on student misconduct in the course profile and on the

　　school web-site: https://www.itee.uq.edu.au/itee-student-misconduct-including-plagiarism

　　2 Specifications

　　This assigment specifies the replacement of the acct(2) system call with a pseudo device driver that

　　provides a device special file that produces messages analogous to the entries written to the accounting

　　file.

　　The acct(4) driver will provide a superset of the functionality that is provided by the current system

　　call. The system call only records information about the process when it exits, but the driver will also

　　report information about process forks and execs.

　　2.1 Code Style

　　Your code is to be written according to OpenBSD's style guide, as per the style(9) man page.

　　1

　　2.2 Compilation

　　Your code is to be built as part of the kernel on an amd64 OpenBSD 6.5 or -current system.

　　The changes to the kernel necessary to configure an acct(4) driver so it can be compiled will be supplied

　　as a diff available from Blackboard. The diff can be applied by running the following:

　　dlg@r630 ~$ cd /usr/src/ sys

　　dlg@r630 sys$ patch

　　Hmm... Looks like a unified diff to me...

　　The driver must be implemented in a single file, and placed in sys/dev/acct .c next to the sys/dev/acct.h

　　provided by the diff described above.

　　2.3 Messages

　　The messages that a program reads from the device driver are represented as a set of structs. The kernel

　　driver populates the structs when the relevant events occur in the kernel, and makes them available for a

　　program to read.

　　The structure of the messages the driver should produce is provided in sys/dev/acct.h.

　　2.3.1 Common Fields

　　All messages from the driver start with a common set of fields that are contained in struct acct_common.

　　The other messages all contain struct acct_common as their first field.

　　The first three fields of the common structure refer to the message itself, rather than the process the

　　message is about. The ac_type field contains a number representing the type of the current message, eg, a

　　value of 0 or ACCT_MSG_FORK states that the message is about a process forking and should be interpreted

　　as the associated message structure.

　　The ac_len field contains the number of bytes used for this message, including the ac_type and ac_len

　　fields.

　　ac_seq is a simple wrapping counter that increments for every message that the driver generates. If the

　　driver receives notification from the rest of the kernel that an event has occurred (eg, acct_fork() is

　　called when a process forks), but is unable to generate a message about it, the sequence number should

　　still be incremented so that the userland consumer of the messages will know that an event has been lost.

　　The counter should be reset to 0 when the acct(4) device is opened.

　　The remaining common fields should be set for the process the message is about.

　　2.3.2 exit message

　　The exit message corresponds with struct acct_exit. The information in this message corresponds with

　　the information described in acct(5). acct(2) may be used as a reference when filling in the information

　　in this message.

　　2.3.3 fork event

　　The fork message corresponds with struct acct_fork, and is generated when a process forks a new child.

　　The information in the message should be based on the parent of the new process, apart from ac_cpid

　　which contains the process ID of the new child. Note that acct_fork is given a pointer to the child, not

　　the parent.

　　2

　　2.3.4 exec event

　　The exec message corresponds with struct acct_exec, and is geneated when a process calls exec(). It

　　exists to record the new name of the binary the program is executing.

　　2.4 Driver entry points

　　acct.c must provide the following functions to support the integration into the kernel, and to provide

　　the required interface for userland to access the driver.

　　2.4.1 Kernel entry points

　　The kernel is patched to call 3 functions when a process forks, execs, or exits. Those functions are

　　acct_fork(), acct_exec(), and acct_exit() respectively. All these functions take a struct process

　　* as their only argument, and do not return anything to the caller.

　　2.4.2 Userland entry points

　　acctattach( ) is called when the kernel starts running for the driver to configure any state needed for it

　　to operate.

　　acctopen() is called when a program attempts to open a device file with the corresponding major number

　　to this driver. It should allow only the 0th minor to be opened, opened exclusively, and only opened for

　　reading. Read/write or write only opens of the device should fail with EPERM. The sequence number for

　　generated messages should be reset to 0 on every open.

　　acctclose() should clean up any state associated with the open driver.

　　acctioctl() should support FIONREAD, and FIONBIO as per the ioctl(2) manpage. FIONASYNC should

　　not be implemented.

　　acctread() dequeues aa single message, and copies as much of that one message as possible to userland.

　　It should support non-blocking reads.

　　acctwrite() should return EOPNOTSUPP as the driver does not support being written to by a userland

　　process.

　　The driver should support non-blocking I/O (well, just O) by implementing acctpoll() and

　　acctkqfilter().

　　3 Submission

　　You are required to implement the acct(4) driver by writing your code in a single file, sys/ dev/acct.c.

　　This file in the OpenBSD source tree will be committed to your SVN repo as ass2/acct.c.

　　Submission must be made electronically by committing to your Subversion repository on

　　source.eait.uq.edu.au. In order to mark your assignment the markers will check out ass2/acct.c

　　from your repository. Code checked in to any other part of your repository will not be marked.

　　As per the source.eait.uq.edu.au usage guidelines, you should only commit source code and Makefiles.

　　The due date for the code submission is the beggining of your prac session, either 10am on Wednesday

　　the 19th, or 2pm on Thursday the 20th of September 2018. Note that no submissions can be made more

　　than 120 hours past the deadline under any circumstances.

　　3

　　3.1 Recommendations

　　The following kernel functionality may or may not be useful in the implementation of this assigment:

　　? malloc(9) - kernel memory allocator

　　? pool(9) - resource pool manager

　　? TAILQ_INIT(3) - doubly-linked list macros

　　? KASSERT(9) - kernel assert routines

　　? uiomove(9) - move (copy) data described by a struct uio

　　? mutex(9) - kernel mutex implementation

　　? rwlock(9) - kernel read/write lock implementation

　　? tsleep(9), and wakeup(9) - process context sleep and wakeup

　　The majority of the OpenBSD kernel still runs under a Big Giant lock, known as the kernel lock, which

　　can be used to provide implicit serialisation of code in this driver . The kernel lock is taken and released

　　with KERNEL_LOCK() and KERNEL_UNLOCK() respectively, or if it is assumed to be held, may be asserted

　　with KERNEL_ASSERT_LOCKED().

　　4 Testing

　　A tool will be provided that reads from the special file and parses the messages as per sys/dev/acct.h.

? ? ? 網絡安全基礎COMP3301/COMP7308課程作業補習考而思教育在線一對一輔導。